MLM Mini-Pro Series
Part Number M00972A
Operator’s Manual
Copyright © 2012 LiftSmart
15
SET UP
To set up the machine, select an area
that is firm, level and clear of debris and
overhead obstructions.
Follow these steps to set up the
machine:
If the material lift is equipped with
stabilizers:
Push down on the stabilizer lock
plates to release the stabilizers
Lower the
stabilizers until
the casters are
in contact with
the ground
Verify that the
lock plates are
engaged and the stabilizers are
locked in the down position
Remove the leg retainer pin
Lower the leg to the down position
Insert the leg retainer pin through the
leg and the base
Repeat the above steps to lower and
secure the other leg
Place the desired load lifting attachment
(standard forks, adjustable forks, boom)
inside the carriage
Insert the fork retainer pin through the
load lifting attachment and the carriage
Engage the locking toggle on the fork
retainer pin
Rotate the carriage hold-down bar up
and away from the carriage
If the material lift is equipped with
adjustable forks:
Pull up on the snap pins
Adjust the forks to the desired
width
Verify that the snap pins are
properly inserted
To install fork extensions:
Slide the extension tube onto the
fork
Adjust the extension tubes to the
desired position
Insert the retaining pins through the
extension tube and the fork
If the material lift is equipped with a load
platform:
Place the load platform on the forks
