3
SECTION 1
DESCRIPTION
1-1 INTRODUCTION
This preliminary publication describes the Lift Table Series manufactured by Lift Products, Inc.
Elm Grove, Wisconsin 53122-0349. Included are operation instructions, planned maintenance
instructions, lubrication procedures, and a partial parts list with parts location illustrations.
For any maintenance instructions not contained in this preliminary publication, contact Lift
Products Customer Service. Be prepared to give model number, serial number, lifting capacities
and lift travel of your table.
The model number, serial number and lifting capacities are stamped on the name plate
(Figure 1-1). The lift travel can be determined by subtracting the lowered height from the el-
evated height.
Users shall comply with all requirements indicated in current edition of A.N.S.I MN29.1. By
following these requirements and the recommendations contained in this manual, you will
receive many years of dependable service from your lift table.
Figure 1-2 shows the location and identification of the decals. Also listed is the touch-up paint
as well as the location of the name plate. Figure 1-3 shows the locations of the lift table main
components.
Note: The user shall see that all name plates and markings are in place and are maintained in a
legible condition.
