‐ ‐
14
Push the equipment over the lift while keeping the equipment parallel with the lift and aligning
the center of gravity of the equipment with the center of the lift. For motorcycles and other two
wheel vehicles/equipment, push forward until the front wheel goes into the wheel clamps.
Motorcycle Fixing
. Engage the parking break of the equipment if applicable. Secure
motorcycle to lift using clamps and straps. Straps MUST be used to secure motorcycle.
Clamps are only for temporary holding.
4.2.3 Power
Connection
Plug in the socket once the lift is proper located. Be sure to wear gloves before starting up.
4.2.4 Emergency
button
Release the emergency button on the remote controller.
4.2.5
To Raise Lift
a. Push UP button ( ) on the controller.
b. Raise vehicle until the clear the floor, then release the UP button.
c. Check wheel clamps and secure straps.
d. Continue to raise to desired height only if vehicle is secure on lift
e. Push the PARKING button ( ) to lower the platform into the locking position
and the locking latches will be engaged.
When any emergency situation comes, press down the red emergency stop
button immediately to stop the vehicle lift. When all emergencies are solved,
turn the key clockwise to disengage the emergency stop.
Before attempting to lift pickup ATVs, be sure that vehicle is stable and proper
secured on lift
4.2.6
To Lower Lift
a. Check all danger points of the lift and be sure that there are no objects or people in
the working area (danger area) around the lift or under the lift
.
b. If the platform already in lock position (latches are engaged), press UP button 2
seconds to raise up the platform a little. The latches will be released.
