10
TOOLS AND HARDWARE REQUIRED
X
SECTION 2 (CONTINUED)
2.3
• Do not hit your feet with the Pole
sections, as serious injury could
occur.
(1)
• THIS STEP CANNOT BE REVERSED!
Strike the end of the Pole Assembly on a piece of scrap wood or
cardboard fi ve to six times.
6x
!
(1)
CMV
(x1)
CMV
ALH
ALH
ALF
1" up from bottom of
Top Pole
• After the Poles have been seated, measure up 1" from the bottom center of the
Top Pole (ALH)
and insert one
Self-Tapping Screw (CMV)
into the Pole as shown.
2.4
WARNING
The Poles must be seated together! Even if the Poles cover
the slots before seating, they must be struck on a hard
surface five to six times! Failure to seat the Poles correctly
could allow the Poles to separate during use, which could
lead to serious personal injuries or property damage.
