background image

2

• Indicates the parts to be used for a section.

• Indicates special heed should be taken when reading.

• Indicates the hardware to be used for a section.

• Indicates the tools to be used for a section.

• Indicates no hardware required for a specifi c page.

• Indicates no parts required for a specifi c section.

• Indicates to use/not to use an electric drill for a specifi c step.

ICON LEGEND

•  Indicates the use of a centerlock nut. A nut with this marking will require some effort to tighten.

This hardware was designed with this feature in order to prevent loosening later.

1190606

10/9/2018

WARNINGS & NOTICES

Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.

To ensure safety, do not attempt to assemble this product without following the instructions carefully. Check entire box and inside all packing 
material for parts and/or additional instruction material. Before beginning assembly, read the instructions and identify parts using the hardware 
identifi er and parts list in this document. Proper and complete assembly, use and supervision are essential for proper operation and to reduce the 
risk of accident or injury. A high probability of serious injury exists if this product is not installed, maintained, and operated properly. 

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY.

Owner must ensure that all players know and follow these rules for safe operation of the system.

• If using a ladder during assembly, use extreme caution.
• Two capable adults are recommended for this operation.
• Minimum operational height is 6 ft 6 in (1.98m) to the bottom of the backboard.

SAFETY INSTRUCTIONS

COPY

Summary of Contents for 73729













Reviews: