Parts and tools needed
Possible consequences:
Safety measures:
Use a standard leak detector to ensure all
connections are tight.
Connecting and disconnecting the gas bottle
DANGER! IGNITION OF ESCAPING GAS
9
G5
G1
G2
G4
1
The tube shall be readily visible across its entire le
With the operating lever at the 9 position push
operating lever in, and push the regulator onto the gas bottle
valve until you hear a click.
ngth for
inspection after installation.
Confirm all barbecue control knobs are in the off position.
Open the gas control valve on gas cylinder. Check for leaks by
brushing soap solution over all gas system joints, including all
valve connections, hose connections and regulator connections.
NEVER USE AN OPEN FLAME to test for leaks at anytime.
If bubbles form out of any of the tank there is a leak. If the
connection is not sealed, immediately close the bottle valve
(turn the operating level G2 to the 9 o clock position) and tighten
the connection or replace the leaking part. Repeat the leak test
annually, and whenever the gas cylinder is repaired or
replenished.
6
Produced in China
4 Burner Gas BBQ with Side Burner
Assembly instructions
