ASSEMBLY INSTRUCTION
EASTERN KING BED / CALIFORNIA KING BED
STEP 1/ DIAGRAM 1
Fix both Leg to the Head Board and as shown in Diagram 1.
STEP 2/ DIAGRAM 2
Fix both side rails to the Head Board and Foot Board as shown in
Diagram 2.
Use the 19 mm bolts, spring washer and the flat washers to secure
the assembly
STEP3/ DIAGRAM 3
Spread out all the slats on to the slat support.
Secure the pre-drilled Slats to the Slat Support using the 32 mm CSK Screw
Attach the Support Legs on to the Slat Support as shown in
Diagram 3.
STEP 4 DIAGRAM 4
Finally, �e both ends of the assembled slats on to the bed frame
on both �s of the side rails and screw them in place with the
32 mm CSK Screws provided as shown in diagram 4
\
Diagram 4
■
:mH+ii·I
CSKJ
J
Screw
32mm
Slat Support
{i)
{i)
..............
Page 2 of2
