LIFESTYLE APPLIANCES MILANO LFS690 Manual Download Page 22

 

 

22 

DRIP TRAY 
 

The drip tray should be cleaned periodically according to the using situation. 

 
NOTE: Allow the drip tray to cool before attempting to clean.

 

 

COOKING GRATES 
 

The cooking grates can be cleaned immediately after cooking is completed and after turning 
off the grill. Wear a barbecue mitt and scrub the cooking grates with a damp cloth. If the grill is 
allowed to cool down, cleaning the grates will be easier if removed from the grill and cleaned 
with a mild detergent. 

 

STAINLESS STEEL 
 

After initial usage, areas of the grill may discolor from the intense heat given off by the burners. 
This is normal. Purchase a mild stainless steel cleaner and rub in the direction of the grain of 
the metal. Specks of grease can gather on the surface of the stainless steel and bake on to the 
surface and give a worn appearance. For removal, use a non-abrasive oven cleaner in 
conjunction with a stainless cleaner. 
 

NOTE: Always scrub in the direction of the grain. 

 

GRILL LIGHT 
 
Bulb Replacement 

IMPORTANT SAFETY INSTRUCTIONS 
Lighted lamp is HOT:

 

 

 

WARNING 

-TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXPOSURE TO 

EXCESSIVE UV RADIATION, OR INJURY TO PERSONS

.

 

 

1. Turn off/unplug and allow to cool before replacing bulb (lamp). 

2. Bulb (lamp) gets HOT quickly! Only contact switch/plug when turning on. 

3. Do not touch hot lens, guard, or enclosure. 

4. Do not remain in light if skin feels warm. 

5. Do not look directly at lighted lamp. 

6. Keep lamp away from materials that may burn. 

7. Use only with a 10-watt or smaller bulb (lamp). 

8. Do not touch the bulb (lamp) at any time. Use a soft cloth. Oil from skin may damage bulb 
(lamp). 

9. Do not operate the portable luminaries with a missing or damaged guard, lamp containment 
barrier, or UV filter. 

Summary of Contents for MILANO LFS690


























Reviews: