- 12 -
2-1.
2-2.
2-3.
2-4.
Join 3pcs supporting bolts & 3pcs washers to the
burner mesh.
Put the burner mesh into burner base.
Use 4 pcs M4×8 mm stainless steel bolts to join the
burner mesh and the base as shown.
Tighten each of the bolts.
STEP 2
STEP 3:
3-1.
Put the protection guard over the burner mesh and align
with the 4-Ø3mm holes around the base as shown.
STEP 3
STEP 4:
4-1.
4-2.
Set 3 pcs washers above the 3 pcs supporting bolts.
Put reflector canopy onto the top of flame screen
aligning through the 3 pcs supporting bolts.
STEP 4
Flame screen
Bolt
Protection net
Hole
Reflector
washer
washer
