LifeSpan S1 Sport Series, Owner'S Manual

Page: 9 / 20

19
19
18
18
9
8
19
18
18
10
12
a) Remove plastic block attached to frame for
protection during shipping.
b) Remove bolts (18) and washers (19) from the rear base.
c) Stand the main frame assembly upright with the rear
base (9) positioned underneath the frame.
d) Insert two bolts (18) with washers (19) down through
the holes in the frame and into the rear base.
e) Once both bolts are started, securely tighten rear
base (9) to frame.
a) Remove plastic block attached to frame for protection
during shipping.
b)
Remove bolts (18) and washers (19) from the front base.
c) Position the front base underneath the frame.
d) Insert the two bolts (18) with washers (19) down
through the holes in the frame and into the front base (8).
d) Once both bolts are started, securely tighten the front
base (8) to the frame.
12
10
on the bolt of
the
1/
Tighten both pedals with the multifuntion wrench (20).
S1 Assembly Instructions
Front
of Bike