background image

 

 

 

                                                                LIFESPAN EQUALIZER  XL                                                  Page 1 

 
 
 
 
 
 
 

 

1. IMPORTANT SAFETY INSTRUCTIONS 

 

Danger

–T

o reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior 

to cleaning and/or service work. 

DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING 

IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.  

1. Plug the power cord of the treadmill directly into a dedicated grounded circuit. 

This product must be grounded well. If it has breakdown, grounding provides a path of least 

resistance for electric current to reduce the risk of electric shock. 

2. Position the treadmill on a clear and level surface. Do not place the treadmill on thick carpet as it 
may interfere with proper ventilation. Also, do not place the treadmill near water or outdoors. 
3. Position treadmill so that the wall plug is visible and accessible. 
4. NEVER start the treadmill while you are standing on the walking belt. After turning the power on and 
adjusting the speed control, there may be a pause before the walking belt begins to move, ALWAYS 
stand on the foot rails on the sides of the frame until the belt is moving. 
5. Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting clothing 
which maybe caught by treadmill. Always wear running or aerobic shoes with rubber soles. 
6. Always unplug the power cord before removing the treadmill’s motor cover. 
7. Keep small children away from the treadmill during operation. 
8. Don’t let go of your hands until you are getting used to treadmill’s waking or running. 
9. If you want to stop the exercise or the Treadmill suddenly increases in speed due to an electronics 
failure, please be sure to put your hands on the both uprights firstly, and then step on the ride rail to 
avoid the damage by moving running belt. 
10. Always attach the safety key rope to your clothing when using the treadmill. If the treadmill 
suddenly increases in speed due to an electronics failure or the speed being inadvertently increased, the 
treadmill will come to a sudden stop when the safety key is disengaged from the console. Pull off the 

safety

 key and keep it well when you do not use the machine. 

Product may vary slightly from the item pictured due to model upgrades 

WARNING - Read all instructions before using this treadmill.

  

It is important your treadmill receives regular maintenance to prolong its 
useful life. Failing to regularly maintain your treadmill may void your warranty.

 

Summary of Contents for Equilizer XL
























Reviews: