20
D.
Press the “START “button once, enter the break mode, and press “START” to continue running.
E.
Press the “STOP” button to sound the buzzer for 0.5s and enter the stop mode.
F.
If no single input in 5Min, buzzer rings 0.5s enter standby mode.
G.
If did not complete the setting in 30s, the buzzer rings for 0.5s and back to standby mode.
H.
If the result of movement is displayed, press “STOP” button to leave and return to standby mode.
12. TARGET HEART RATE
：
A.
Press” TARGETHEART RATE” button, enter to this mode, LCD flashing display Age ICON with
presetting value 30 or the last setting value. Press “UP, DOWN” button to setting (setting range 11~99), it is
non-recyclable.
B.
After setting, press “ENTER” confirmed, LCD display the presetting value 65%, press “UP, DOWN”
button to adjust to 65% or 85% & the value of Pulse, LCD will show the corresponding value.
C.
If selected PULSE, LCD display the presetting value “100”, press “UP, DOWN” button to setting (setting
range 30~230), it is non-recyclable.
D.
Press “ENTER” button to start to count, TARGET & PULSE ICON is flashing.
E.
When the heartbeat value is higher or lower than the setting value (+/-10%), the PULSE value is
displayed continuously.
F.
The heartbeat value is lower than the setting value (<10%), and the PULSE window "UP IOCN" flashes
to remind USER to accelerate.
G.
The heartbeat value is higher than the setting value (>10%), and the PULSE window "DOWN IOCN"
flashes to remind USER to slow down
H.
The heartbeat value is higher than or equal to the setting value of 100%. The buzzer rings 3 short
sounds every 1s. After 10 times, the heartbeat value is still not lower than 100%, the buzzer rings 1s and
enter the standby mode.
I.
Without any heart single input in 30s, the “PULSE” LCD window display “P”, buzzer rings 1s and enter the
standby mode.
J.
Press the “START “button once, enter the break mode, and press “START” to continue running.
K.
Press the “STOP” button to sound the buzzer for 0.5 seconds and enter the stop mode.
L.
If no single input in 5Min, buzzer rings 0.5s enter standby mode.
M.
If did not complete the setting in 30s, the buzzer rings for 0.5s and back to standby mode.
N.
If the result of movement is displayed, press “STOP” button to leave and return to standby mode.
Set Age 65% 85% PULSE START < TARGET10% >TARGET10%
