16
4. Stop mode:
Press “STOP” button with buzzer sound 0.5s, enter Stop mode.
All the LCD windows no display, but after 0.5s LCD will display TIME, DIST, CAL (display KM or ML
according to the setting).
After 7s with buzzer sound 0.25s, LCD display MAX ICON, WATTS,SPEED, PULSE, also after keep
shows 7s with buzzer sound 0.25s, LCD display AVE ICON WATTS, SPEED, PACE, after keep shows 7s
without display any data at the moment, then re-show the data two times and enter into standby mode.
(FIG 5)
->
->
(FIG 5)
5. Quick start:
In standby mode, with single RPM>20 input, quick press “START”, buzzer sound 0.5s, then TIME,
CALORIES, DISTANCE, WATTS, SPEED, & PACE shining in in sequence, the value will count up
according to the operation
.
(FIG 6)
A.
“PULSE” ICON: if any heart single input the “PULSE” ICON is flashing with current value, if no heart
single input LCD display “P”.
B.
If without any single input within 5Min, the buzzer rings for 0.5s and computer will go back to standby
mode.
C.
If setting is not completed in 30 seconds, the buzzer will ring for 0.5 seconds and go back to standby
mode.
D.
Press the “START” button once to enter the break mode, and press “START” to continue running.
E.
Press the “STOP” button to sound the buzzer for 0.5 seconds and enter the stop mode.
F.
If the result of movement is displayed, press “STOP” button to leave and return to standby mode.
G.
When adjusting the adjustment button, it will display the LOAD resistance for each segment in WATT
window.
