background image

GENERAL SAFETY INSTRUCTIONS 

PURPOSE 

This product is intended for outdoor, domestic use only. It is not suitable for commercial or medical use. 

 

1.1 DANGER FOR CHILDREN 

WARNING! No eating while using the product 

•  This product may only be used with adult supervision at all times. 

•  The packaging material is not suitable for children due to choking and suffocation hazards. 

•  Not suitable for children under 3 years. 

•  Max Users: 2  

•  Max User Weight: 50kg 

•  Max Fall Height for this produce is 180cm. 

•  It should be used in combination with the corresponding components. It cannot be used as standalone. 

 

1.2 RISK OF INJURIES 

•  Do not use the product if it is damaged or defective. If it is damaged or defective, please contact a qualified technician. 

•  Check the product before each use. Defective parts must be changed immediately as they can impair the function and the safety of the product. 

•  Use the product only on even and non-slipping surfaces. Never use it near water and keep enough space around for safety. 

 

1.2 PRODUCT DAMAGE 

•  Do not make alterations to the product. Only use original spare parts. Qualified technicians should only carry out repairs – improper repairs can lead to 

danger for the user. Use this product only as described in this manual. 

 

1.3 ASSEMBLY ADVICE 

•  The product should be installed over impact absorbing surfaces such as sand, wood-bar chips, rubber and foam and should not be installed over 

concrete, asphalt or any hard surface.  

•  This product should be anchored into ground with concrete in 350(L) x 350(W) x 350(D)mm. 

•  The assembly of the product must be done carefully and by an able-bodied adult. If in any doubt, ask a technically qualified person. 

•  Before you start with the assembly, read the instructions carefully. 

•  Remove all packaging materials and lay down all parts on an open space. This gives you an overview and simplifies the assembly procedure. 

•  Check with the parts list that all parts are available. Dispose of the packaging material when the assembly is completed. 

•  Beware that when using tools or doing technical work, there is always a risk of injuries. Assemble the product with care. 

•  Create a danger free environment; for example, do not let tools lay around the workspace. Store the packaging material in a way that cannot cause 

•  any danger. 

•  After installing the product according to the instruction manual, ensure all screws, bolts and nuts are correctly installed and tightened and that all joints 

•  are secure. 

•  Reasonable space must be kept between the product and possible sources of danger, such as other equipment swimming pools and fences. 

•  The product must be assembled correctly before use. 

•  Place the product on a level surface at least 2 m from any structure or obstruction such as a fence, garage or house. 

Summary of Contents for LK 51 JUNIOR JUNGLE















Reviews: