2
BEFORE USING THE PRODUCT
1) Place the product on a level surface at least 2 meters away from any hazard, structure or
obstruction such as fence, garage, house, overhanging branches, laundry lines or electrical wires.
DO NOT place on hard surface such as concrete or asphalt as a fall onto a hard surface can cause
serious injury.
2) Clear the play area of all sharp objects such as stones, twigs or any other object that can cause
injury to the players and / or damage to the structure’s construction.
3) Unpack the jumping castle structure and unfold fully as shown in (Fig.1).
4) Unpack the air fan blower from its carton and follow the operating instructions BEFORE
attaching to the structures airflow inlet tube as shown in (Fig.2). The nylon inlet tube is simply
attached around the fan’s outlet by tying the cord tightly behind the tube’s flange.
5) The jumping castle must be anchored to the ground using ground pegs at each fixing point on
the structure (Fig.3) to prevent overturning or lifting during use. Ensure that the pegs are level with
or under the ground to reduce tripping hazards.
6) Connect the air fan blower to a suitable electric earthed socket ONLY.
7) Do not use in wet or windy conditions.
8) Children should remove shoes and any sharp or pointed objects such as buckles on belts,
eyeglasses etc. as these could cause injury to themselves and / or damage to the structure.
9) Plug in the air fan blower and switch on. The jumping castle should inflate within 90 seconds. If it
is taking longer check that the air inlet tube is not obstructed.
IMPORTANT:
1. AIR SEEPAGE THROUGH SEAMS OF THE STRUCTURE IS NORMAL, AS SOME AIR
NEEDS TO ESCAPE DUE TO THE DESIGN OF THE PRODUCT.
2. DO NOT USE UNLESS ALL AIR COMPARTMENTS ARE INFLATED.
Summary of Contents for Crocadoo Slide and Splash
Page 5: ...5 SET UP STORAGE...
