14
5
8
9
85
70
57
39
3
6
65
65
88
90
Step 5
1. Install the Roll wheel position stopper
(85) on Pedal group-left (8) with an Allen
Pan head half thread bolt (70) and a hex
self-locking nut (57)
2. Assemble the right side same as the
above steps.
3. Add some oil on the sliding rail.
Step 6
1. Connect the communication line (88),
and hand pulse communication line (90)
with console communication line.
2. Assemble the console (39) on console fix
frame (3), and secure with 4pcs Philips
C.K.S. full thread bolt (65).
Step 7
1. Attach the I-pad holder (100) to the
console (39) with 4pcs Philips C.K.S.
self-tapping screw (62).
Attention: If you buy an I-pad holder, the
step is needed. Otherwise, you can skip
this step.
7
39
100
62
62
