5
2) By pressing the
0
C/
0
F/Down button, you can switch the temperature format from Fahrenheit
to Celsius and vice versa.
3) By pressing the TIME button, the LED display will switch from the temperature status to the
TIME status and begin to flash. The default time will display “--“. This means that the TIME
is not activated and, therefore, the heater will remain on. You must press the HI/LOW/UP
button or the
0
C/
0
F/DOWN once again within (5) seconds to set the time. Each time you
press the HI/LOW/UP button, the time will increase by 0.5 Hr. If you press the
0
C/
0
F/DOWN button, the time will decrease by 0.5 Hr. The maximum value for time is 8.0
Hr. By holding down the HI/LOW/UP button or
0
C/
0
F/DOWN for (2) seconds, the number
rotation will cycle more quickly. If you do not press the HI/LOW/UP button or
0
C/
0
F/DOWN
within (5) seconds, the time status will switch back to the temperature status.
Press TIME to switch
to time status, then
press HI/LOW/UP
button once within 5
seconds to scroll up
5 seconds later the
value switches to
ambient temperature
Press the
0
C/
0
F/Down to
switch from Fahrenheit
to Celsius.
