lifeSMART Ultra LS1500-4WC User Manual Download Page 10

 

9

 

 

SOLUTION:

  First, test your outlet to make sure it has power.  You can do this by plugging in 

another appliance and turning the appliance on.  Secondly, check the LED display to see if it is 
flashing.  If this is the case, press the POWER button to turn off the TIME and resume normal 
operation of the portable heater.  Third, check the power switch to see if it is lighting up.  If the outlet 
does have power, the LED display is not flashing, or the power switch is not lighting up, then contact 
the manufacturer immediately for further troubleshooting. 

4. PROBLEM: 

a.  The portable heater continues to operate even when the power switch is turned off. 

SOLUTION:

  

Do not

 unplug.  The portable heater has a fan that will continue to operate even when 

the power switch is turned off.  This fan continues to run in order to cool down the portable heater.  
Once the fan stops running, you can then unplug the portable heater. 

5. PROBLEM: 

a.  The control panel displays no temperature or TIME. 

SOLUTION:

  First, check to make sure the power cord is not damaged, is plugged in, and the outlet 

has power.  Secondly, check to make sure the control panel is not damaged.  If the control panel 
display continues to be inoperable, contact the manufacturer for further troubleshooting. 

6. PROBLEM: 

a.  The control panel is displaying a temperature and TIME, but the portable heater does not 

operate. 

SOLUTION:

  The Signal Cable or other relevant plugs may have become disconnected.  Please 

contact the manufacture for further troubleshooting. 

7. PROBLEM: 

a.  The heat emitter is functioning and the air outflow is working, but the temperature displayed 

on the LED panel does not increase. 

SOLUTION:

  The temperature sensor may be damaged or has become disconnected.  Please 

contact the manufacture immediately for further troubleshooting. 

8. PROBLEM: 

 

a.    The display shows “Er”.  This error code means the heating system is not working correctly. 

SOLUTION:  

Contact the manufacturer immediately.  

DO NOT

 attempt to operate the portable 

heater as this may cause electric shock, fire, and/or injury. 

 

 

 

 

Summary of Contents for Ultra LS1500-4WC













Reviews: