8
STEP 4 – Flame Deflector (#5), Drip Pan (#6), Cooking Grate (#7), and Drip Bucket (#8)
Installation
Open the lid of the
LIFESMART PELLET GRILL
Install the Flame Deflector (#5) over the Air
Box Assembly with the small notches of the flame deflector over the small tabs located at the
inside front and rear of the grill body.
Install Drip Pan (#6) with the short lip sitting on the left-side drip pan support and
the longer lip resting on the right-side lower support. Make sure to leave equal gapping
between Drip Pan and front and back chamber walls to ensure even heat distribution.
BE CAREFUL NOT TO DAMAGE THE TEMPERATURE SENSOR WHILE INSTALLING THE
DRIP PAN.
(TIP: many customers line their drip pan with aluminum foil for easier clean up. When lining
drip pan, keep foil inside drip pan edges and do not wrap around as this can restrict airflow.)
Install the Cooking Grate (#7) by resting it flat on the front and back ledges inside chamber. Be
careful to avoid the temperature sensor during placement.
Install the Drip Bucket (#8) by clipping the handle to the integrated hook on grease spout at
right of chamber and allow it to hang.
#7
#6
#5
