* I f the rollers get stuck,turn of the switch and press the ON/OFF button.the roller will be
back to its initial position.
Confirm the fabric
Make sure if the fabric is damaged according to the following procedures before use.
CD
Open zipper and back cushion
from one side
@
Put your hand between cushion and
backrest to see if the fabric is damaged.
Fabric
Open from this side
Back cushion
Check the power cord,power plug,socket on the chair,main power
switch,confroller are unbroken for the first time use or use after long
time storage.Then plug power cord.
Connecting the power
r
Power cord
A
CAUTION
Before using the chair
,
confirm that whe
t
he
r
there is damage in the mate
r
ial
of the a
r
mchair or of othe
r
parts. In case o
f
damage, eve
n
the sma
l
lest tea
r
ing, in the chair, please stop using
i
t
i
mmediate
l
y, tru
n
off
t
he powe
r
sw
i
tch,
unplug the chair, and contact the customer service center. Never use the
armchair wi
t
h dismant
l
ed cus
h
io
n
or damaged mate
r
ial, otherwise there will
be serious safety hazard.
([
Adjustment of chair angle
Plug
Controller wire
Socket
m
Raise the backrest
Press this button to raise the backrest. Press the button again to confirm the
position when the backrest is at the desired angle
•
Decline the backrest
Press this button to decline the backrest. Press the button again to confirm
the position when the backrest is at the desired angle.
Attention:When main power switch that is at the back of the chair is on.angle adjusting
can still be done even not pressing On/Off button of controller.However angle adjustment
is unavailable when in emergency stop condition.
When adjusting angle.please make sure there is no person(Especially
children) or pet around.Besides.there must be at least 11.811in space in
the front or at the back of the chair.and there is no other object in the
way when rotating.
A w A R N I N
r
AwARNING
•
Do not connect power cord to an external transformer
AcAur10N
\..
• Ensure the main power switch is off before plugging the power socket or
controller.
• Please insert power plug and controller plug fully
• Read this manual book carefully before using.set the chair according to
the requires.ensure normal operation
