Oriental Screw
Pull outside to right
1
Outside
Outside
Push inside to right
2
2.1 Installation Notice
1 . Change Direction of Front Panel Handle
2 . Direction of Opening
3 . Door Thickness and Front Plate Length /Thickness Measurement
Adjust the handle to the position as
the dashed line shows (see right)
.
Fix the orientation screw.
Twist square hole towards handle
direction until it is fixed.
Same steps are applied to both front
and back panels.
The lock body is compatible for doors with thickness ranged
45mm-55mm. If your door is thicker than 55cm, components will have
to be customized. Please check before installation, and contact your
retailer if the lock body does not fit in.
INSTALLATION
2
3
4
1
Outside
Outside
Pull outside to left
3
Push inside to left
4
Measuring the
thickness of
the door
ATTENTION
Measuring the
thickness of the
front plate
Measuring the
length of the
front plate
09
10
