6
MAINTENANCE
1.
Turn off the power switch in the rear of the unit.
2.
Unplug the unit and let it cool completely.
3.
To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a
mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let
liquid enter the heater.
4.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the
heater. This may cause damage or deterioration to the surface of the heater.
5.
DO NOT immerse the heater in water.
6.
Wait until the unit is completely dry before use.
7.
Air filter needs cleaning after used 3 months. Please take down the filter as following steps. Flush
and clean the taken –down filter with water ,then dry it out and re-assemble.
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original
packaging to repack the unit.
TROUBLESHOOTING
If the heater will not operate, please check the following before seeking repair of service:
1.
Check if the power cord is plugged into an electrical outlet, if not, plug in.
2.
Check if electricity to the main fuse is working.
NOTE: The heater may not be operating if the thermostat is set higher than the room temperature.
To begin operation, increase the thermostat temperature for a higher heat setting.
Air filter
The unit
Fixing panel
Fixing screws
