Lifescan OneTouch FastTake, Owner'S Booklet

Page: 46 / 132

36
The OneTouch
®
Fast Take
®
Meter comes with the date,
time, and unit of measurement preset. However, if
you need to change the time, or if you remove the
batteries, you will need to enter the setting mode and
reset. You will not be able to perform a blood glucose
test until you have set up the meter completely.
SETTING UP THE METER
Setting the Date, Time, and Unit of Measurement
CAUTION: Check your OneTouch
®
Fast Take
®
System to be sure the
outer carton seal is not missing or broken. If either of these
conditions occurred, please call the OneTouch
®
Customer Care
Line at
1 800 663-5521
.
To set the date, you must first enter the setting mode.
Start with the meter off. Then press and hold the M
button for three seconds. The meter is now in the
setting mode.
The year setting will appear first. Press
and release the C button to advance one
year. To move faster, hold the C button
down. With the correct year on the display,
press the M button and the month and day
will appear on the display with the month
segment flashing.
Set the Year.
STEP 1
DCO_05265303A_OTFT_OB_CAN_EN 2/2/04 2:39 PM Page 36