If you are using the meter for the very
first time and have not used it for
testing, or if you have used a software
program to clear the meter’s memory,
the following message will appear,
indicating that there are no results
stored in the memory:
Recalling Test Results
Pressing the M button allows you to see
each blood glucose, check strip, and
control solution test stored in memory.
The records will appear in order from the
most recent to the oldest, up to the full
75
-record capacity of the memory. Test
results will appear on the meter display
as follows:
(Examples)
When the memory returns to the most
recent result, the meter will beep (if the
Beep option is set to
). You can exit
the memory mode at any time by
pressing the on/off button.
46
DCO_06331801A_OTB_OB_US 11/25/03 3:27 PM Page 46
