How to do a check strip test:
Step 1: Press the On/Off Button.
Insert Side 1 of the Check Strip.
When
insert code 10
(Example)
strip
appears, slide
the notched end of the
check strip into the
test strip holder with
Side 1 (purple side)
facing up.
wait
appears for a moment.
Step 2: When
apply sample
Appears, Remove the
Check Strip from the
Test Strip Holder.
M
C
1
✔
Step 3:
When
insert side 2
Appears, Turn the
Check Strip Over
and Slide It Back
into the Test Strip
Holder.
It should go in notched end first,
Side 2 (white side) facing up. The
meter counts down from four to zero
and then gives you a check strip
result.
Note: This is the only time you
should remove a strip during a test.
Note: Do not apply control
solution to the check strip.
M
M
C
1
✔
2
✔
M
M
C
13
