NPE Installation Manual
2
3
Description
The NetPower NPE130 PoE power extractor is designed to
provide 12VDC, up to a maximum of 25W output power, to a
non-PoE IP device (e.g. IP camera) from a PoE source.
RJ45 connectors are provided for data input and output, and
two terminal strips are provided for the DC output and power
level selection.
The NPE130 is compatible with the IEEE802.3at standard and
is capable of accepting PoE connections of Mode A, Mode B,
or Mode A and B simultaneously.
Operation with reverse polarity at the PoE input is also sup-
ported.
Mounting the NPE130 Series Module
The NPE130 mounts using two screws in the mounting
tabs. The NPE130 is also available in a DIN Rail mount-
able version (NPE130DR). The unit must be mounted in a
secure, indoor, dry location to a suitable surface, using suit-
able hardware.
Specifications
NPE130
Input Voltage
50V Nominal (42.5 to 57 VDC compatible to IEEE802.3at)
Input Current
0.7A Max
Output Power
25W Max (when power select terminals are shorted) 13W Max (when power select
terminals are open)
Output Voltage
12VDC
Data Rate
10/100/1000 Base-T
ESD Immunity
8kV
RJ45 Pinout
Input power connection 1: Pins 1, 2; Pins 3, 6; (any polarity)
Input power connection 2: Pins 4, 5; Pins 7, 8; (any polarity)
Data: Pins 1, 2, 3, 4, 5, 6, 7, 8
Operating Ambient Temperature
0 to 49°C, Indoor Dry Locations
Storage Temperature
–20 to +70°C
Operating Humidity
5 to 95% (Non-Condensing)
Size
4.20" L x 2.50" W x 1.20" D
(107mm L x 64mm W x 31mm D)
Weight
0.25 lb (0.11 kG)
Data
PoE/Data
Output Status
12VDC –
Open: Class 3 Short: Class 4
#6 Diameter
3.85”
Regulatory Information
The equipment discussed within this manual has been tested
to the following standards:
• UL294b
• UL/CUL 60950-1
• CSA C22.2 No. 205-M1983
