LifeSafety Power FlexPower RA100 Series, Installation Manual, Page: 16 / 18

RA Series, RD Series Rackmount Installation Manual
12 13
Specifications
RD Series DC Power Supplies - Dual Voltage
Specifications RD75/75 Series RD150/150 Series RD250/250 Series
AC Input Voltage 120/230VAC
±15% at 50-60Hz
120/230VAC
±15% at 50-60Hz
120/230VAC
±15% at 50-60Hz
Power 200 Watts 400 Watts 600 Watts
Standby Current 200mA 200mA 200mA
Rated Current for UL603 Pro-
prietary Alarm Installations
Current 1 .25A maximum from all
circuits in system
2 .5A maximum from all
circuits in system
2 .5A maximum from all
circuits in system
DC Output for EACH internal
supply at 12V Setting
Voltage 12 .5V ±0 .5V nominal 12 .5V ±0 .5V nominal 12 .5V ±0 .5V nominal
Max Current 6A 12A 20A
Ripple 120mV 120mV 120mV
Regulation ±2% ±2% ±2%
Efficiency 85% (120VAC
60Hz In, Full Load, No
Batt)
88% (120VAC
60Hz In, Full Load, No
Batt)
89% (120VAC
60Hz In, Full Load, No
Batt)
DC Output for EACH internal
supply at 24V Setting
Voltage 25 .0V ±0 .5V nominal 25 .0V ±0 .5V nominal 25 .0V ±0 .5V nominal
Max Current 3A 6A 10A
Ripple 120mV 120mV 120mV
Regulation ±2% ±2% ±2%
Efficiency 85% (120VAC
60Hz In, Full Load, No
Batt)
88% (120VAC
60Hz In, Full Load, No
Batt)
89% (120VAC
60Hz In, Full Load, No
Batt)
Battery for EACH internal
supply
Size & Type 4-40AH Lead Acid
or Gel Cell
4-80AH Lead Acid
or Gel Cell
4-80AH Lead Acid
or Gel Cell
Charge Current 1A (±10%) Maximum
(Adjustable via
PowerCom Software)
2A (±10%) Maximum
(Adjustable via
PowerCom Software)
2A (±10%) Maximum
(Adjustable via
PowerCom Software)
Fuse Ratings DC1 (Internal) ATM 7 .5A ATM 15A ATM 30A
DC2 (Internal) ATM 7 .5A ATM 15A ATM 30A
Battery (Internal) ATM 7 .5A ATM 15A ATM 30A
Distributed Zones
(Fused Models)
ATM 3A ATM 3A ATM 3A
BTU Output BTU 66 132 218
Fault Setpoints Low AC 95V (±6%) 95V (±6%) 95V (±6%)
Earth GND 2000 Ohms 2000 Ohms 2000 Ohms
Output Voltage ±10% of nominal ±10% of Nominal ±10% of Nominal
Batt Voltage ±10% of nominal ±10% of Nominal ±10% of Nominal
Batt Presence 6–15V (12V Setting),
11–29V (24V Setting)
6–15V (12V Setting),
11–29V (24V Setting)
6–15V (12V Setting),
11–29V (24V Setting)
Fault Relay
Contacts
AC FLT 1A at 24VDC 1A at 24VDC 1A at 24VDC
SYS FLT 1A at 24VDC 1A at 24VDC 1A at 24VDC
Distributed Outputs
Count
2, 8, or 16 2, 8, or 16 2, 8, or 16
Fused 3A (7 .5A max with fuse
change)
3A (7 .5A max with fuse
change)
3A (7 .5A max with fuse
change)
Models ending in "P" 2 .5A (PTC) 2 .5A (PTC) 2 .5A (PTC)
Section 3 – Specifications