Lifepro SIRS-01 User Manual Download Page 4

4

SAFETY INFORMATION 

Please read and understand this entire manual before attempting to assemble, operate, or install the 
product . 

IMPORTANT SAFETY INSTRUCTIONS

WARNING

: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO . When using electrical 

appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and 
injury to persons, including the following:
•  This heater must be plugged into a 220 V, 7 .5 amp (or more) circuit of its own . Do not plug anything 

else into the same circuit . If unsure if your home meets this specification, consult a certified 
electrician prior to use . 

Risk of fire, overheating, malfunction, property damage, injury, or 

even death may result if not adhered to! 

•  Connect to a properly grounded, 3-prong outlet only . Do not connect the heater to extension cords, 

surge protectors, timers, direct breakers, or an outlet with other appliances connected to the same 
outlet . 

Risk of fire, overheating, malfunction, property damage, injury, or even death may 

result if not adhered to!

•  This heater is hot when in use . To avoid burns, do not let bare skin touch hot surfaces . Use handles 

(certain models) or wheels to move this heater . 

•  Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at 

least 3 ft . (0 .9 m) from the front of the heater and keep them away from the sides and rear of the 
heater .

•  Extreme caution is necessary when any heater is used by or near children, invalids, pets, or when 

the heater is left operating unattended .

•  Always unplug the heater when not in use .
•  Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been 

dropped, or damaged in any manner . Contact the manufacturer for resolution options .

•  Do not use outdoors . Exposure to outdoor elements such as rain, snow, sun, wind, or extreme 

temperatures may cause the heater to become a safety hazard .

•  This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations, nor 

any locations that use GFCI outlets .

•  Never place the heater where it may fall into a bathtub or other water receptacles .
•  Do not run the cord under carpet . Do not cover the cord with throw rugs, runners, or similar 

coverings . Arrange the cord away from traffic areas and where it will not be tripped over .

•  The heater must be plugged into a wall outlet that is a dedicated circuit with a minimum 15 amp 

rating on that individual circuit . 

•  To disconnect the heater, first turn the power button to the OFF position and then remove the plug 

from the wall outlet .

•  Do not allow foreign objects to enter or block any ventilation or exhaust opening as this may cause 

electric shock, fire, or damage the heater .

•  Allow at least 3 ft . of unobstructed space to the front and rear of the heater to allow for maximum 

heat, air, and ventilation flow . 

•  A heater has hot and arcing or sparking parts inside . Do not use it in areas where gasoline, paint, 

or flammable liquids are used or stored, nor use flammable solvents to clean the heater . Keep the 
heater dry at all times . 

•  Use this heater only as described in this manual . Any other use not recommended by the 

manufacturer may cause fire, electric shock, or injury to persons .

•  Do not use abrasive solvents to clean the heater as it may cause 

damage to the finish or casing .

Summary of Contents for SIRS-01














Reviews: