SECURE THE ASSEMBLED SEAT
TO THE BIKE FRAME
1. Locate the seat adjustment knob
(15)
on the back of the seat post
insert
(14)
.
2. Loosen the knob (but do not remove it) by turning it counter-clockwise.
3. Pull the knob head out and slide the seat post
(13)
into the seat post
insert
(14)
. A "click" indicates that the seat post is locked into position.
4. Tighten the knob to secure the seat post by turning it clockwise.
NOTE:
Adjust the seat to your desired height after the bike is fully
assembled. See
ADJUST THE SEAT HEIGHT
on page 22 for instructions.
7
Endurance Training Collection
17
16
VeloCycle User Manual Lifepro
Endurance Training Collection
17
INSTALL TWO AA BATTERIES
IN THE CONSOLE
1. Locate the two AA batteries
(32)
in the tool/accessory bag.
2. Remove the battery compartment cover on the back of the
console
(29)
.
3. Insert two AA batteries into the battery compartment according to the
polarity markings in the compartment.
4. Replace the battery compartment cover.
CAUTION:
Never mix old batteries and new batteries. Only use AA
batteries with the console.
8
Cover
32
29
(32)
x2
TOOLS & HARDWARE
15
14
13
