background image

model no. 

IFH1

2

A-75

 

This appliance must be grounded!

The appliance must be connected to a current protection circuit or device with 50 amp before being connected to power supply!

 

 

 

 

 

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,

electric shock, and injury to persons, including the following:

1. 

Read all instructions before installing or using this heater.

2. 

This heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers,
clothes and curtains at least 3' (0.9 m) from the front of the heater and keep them
away from the sides and rear.

3.  Extreme caution is necessary when any heater is used by or near children or

invalids, and whenever the heater is left operating and unattended.

4.  Always turn off the power when not in use.

5. 

Do not operate any heater after it malfunctions, has been dropped, or damaged in

any manner. Disconnect power at service panel and have heater inspected by a

reputable electrician before reusing.

6.  Do not use outdoors.

7.  This heater is not intended for use in bathrooms, laundry areas and similar indoor

locations. Never locate heater where it may fall into a bathtub or other water

container.

8.  To disconnect heater, turn controls to off, and turn off power to heater circuit at main

electrical panel.

9.  Do not insert or allow any foreign objects to enter any ventilation or exhaust

openings as this may cause an electric shock, fire

, or damage to the heater.

10. 

To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not

use on soft surfaces, like a bed, where openings may be blocked.

11.  This heater has hot and arcing or sparking parts inside. Do not use it in areas where

gasoline, paint, or flammable liquids are used or stored.

12. 

All wiring must be carried out by a certified electrician and comply with national and

local electrical codes in the United States and Canada.

13.  Use this heater only as described in this manual. Any other use not recommended

by the manufacturer may cause fire, electric shock, or personal injury.

14.  This heater may include a visual alarm to warn that parts of the heater are getting

excessively hot. If the alarm illuminates, immediately turn the heater off and inspect

for any objects on or adjacent to the heater that may have blocked the airflow or

otherwise caused high temperatures. DO NOT OPERATE THE HEATER WITH THE

ALARM ILLUMINATING.

Summary of Contents for IFH11A-75













Reviews: