7
8
Step 3: Put the ingredients in the chutney jar for grinding. Hold the lid tightly
so that it won’t get healed up.
STEP 4: The ingredients should not be too large. Break ingredients into
smaller pieces.
Note: The lid should be properly pressed.
OVERLOAD PROTECTION
CLEANING INSTRUCTIONS
• The overload protector (OLP) is designed to protect the
motor (refer fig 4) from burning.
• In case of an overload, the blade of the jar stops rotating and
the motor gets jammed or starts heating up.
• If such a situation occurs the mixer grinder will automatically
trip off and hence protect the motor.
• Let the motor cool down for a couple of minute. The red
button of the overload protector switch located at the bottom
of the mixer grinder has to be pressed for re-operation.
• If you have to reset the OLP again and again, try reducing
the quantity of ingredients in the Jar.
Overload Protector
• Before use pour warm water in the jar, run for a few seconds and throw away the
water.
• The cleaning of the mixer grinder and jars are very necessary for maintaining
smooth operation of the mixer grinder and proper hygiene.
• After you have used the mixer grinder, use warm water to remove the smell of the
material from the jars and then rinse under running water.
• In order to clean the blades thoroughly, remove the blades by using the spatula to
loosen the screw by twisting the dome nut on the blade clockwise, while holding the
coupler from under the jar.
