OPERATIONAL GUIDELINES
Getting started
：
Insert the power plug into socket, Press the power
switch “ON”. Treadmill will boot with “di” alarm noise.
Attention
：
Clip the other end of safety key on clothes and don’t take
it off from the body.
1. Place safety key onto specified location, then the control panel
and LED light will change from "SAFE" to "-.-.-.-" and give out “dididi”
alarm noise
2. Press “START/STOP” button, treadmill starts to work after 3
seconds and screen shows 1.0Km/h as the lowest speed. Press
"Speed + "and "speed -" buttons to adjust speed value.
3. Press “MODE” button to switch functions: Auto, select speed
acceleration and speed deceleration.
4. Press “START/STOP” button, speed slows down and stops
gradually.
*Remove the Safety Key, screen will show “SAFE”, running belt
stops automatically.
*Product will stop automatically after 30 minutes of continuous
operation.
5. Slope adjustment, pull out the latch from both sides and insert
them to the suitable position when you need to adjust the slope.
（
Note
：
Insert into the same space on both sides
）
Step 3
：
Install the safety key
（
Picture 3
）
.
Step 4
：
Install the frame fixing knob (Picture 4).
Step 5
：
Turn on the treadmill power switch
（
Picture 5
）
.
6
7
PIC 3
Fix the
knob and
screw up
the frame
PIC 4
PIC 5
Switch on
Put on the
safety key
Adjusting the
position at
same time on
both side
