ASSEMBLY INSTRUCTIONS
CONSOLE FUNCTION
1. START button and STOP button
：
START button: Press “START” button when treadmill is in not
working, the speed displayed is 1.0Km/h, then the treadmill starts.
STOP button: Press “STOP” button when treadmill is in operation,
figures clear to zero, treadmill stops moving and returns to user
mode, then the treadmill stops.
2. AUTO button
：
Press AUTO button to switch from manual mode to auto mode
programs P1-P12 when the treadmill is in standby status.
Manual mode is system’s default mode, the default speed of the
manual mode is 1KM/H, and the maximum running speed is
12KM/H.
3.SELECT button
：
When the treadmill is in standby mode, pressing this button allows to
choose from three different countdown operating modes: time
countdown mode, distance countdown mode and calories
countdown mode; use Speed +/Speed - button to set the related
countdown values, press “START” button to start the treadmill after
setting completion.
4. SPEED +/SPEED- button
：
Adjust values when setting treadmill parameters. Adjusting speed
when treadmill is working, speed will automatically continue to
increase or decrease when holding the buttons for more than 2
seconds.
Step 1: Take the treadmill out from packaging box, keep it on the floor, stretch
out the treadmill, pull up the side handrail and place well the meter board. (As
shown in Picture 1).
Step 2: Install the screws and the side handrail cover at the specified position.
(Picture 2).
4
5
PIC 1
PIC 2
Step 2
Step 1
Unfold the
machine
Pull up the
handrail
Put down the
computer
Fix the bolt
and put on the
covers
