11
COMPUTER OPERA
TION
Computer Panel Functions:
TIME:
Displays your elapsed workout time in minutes and seconds. Press the START button and then press the FAST button, the
running belt starts moving with the speed at 0.8km/h. You may press the FAST or SLOW button on the computer console or
handlebar to increase or decrease the running speed during exercise. Time starts counting up from 0:00 to 99:59 per 1 second
increment. You may also preset target time before training. Press the MODE button to select TIME mode when TIME flashes
and then press the SET button to preset time target. Each increment is 1 minute. The preset time range is from 0:00 to 99:00
minutes. Press the MODE button for 5 second will reset the function value of TIME to zero for target presetting. Once you
preset the time target, press the START button and then press the FAST button, the running belt starts moving with the speed at
0.8km/h. You may press the FAST or SLOW button to increase or decrease the running speed. Time starts counting down from
preset target time to 0:00 per 1second backward. When the preset target time counts down to 0:00, the computer will begin
beeping to remind you and the running belt will stop automatically.
SPEED:
Display the current running speed from the minimum 0.8km/h to the maximum 12km/h. You may also press the FAST or
SLOW button on the computer console or handlebar to speed up or down your running speed during exercise.
DISTANCE:
Displays the accumulative distance traveled during workout. Press the START button and then press the FAST button, the
running belt starts moving with the speed at 0.8km/h. You may press the FAST or SLOW button on the computer console
or handlebar to increase or decrease the running speed during exercise. Distance starts counting up from 0.0 to 99.9km
per 0.1km increment. You may also preset target distance before training. Press the MODE button to select DISTANCE
mode when DISTANCE flashes and then press the SET button to preset target distance . Each increment is 0.1km. The
preset distance range is from 0 to 99.9km. Press the MODE button for 5 second will reset the function value of DISTANCE
to zero for target presetting. Once you preset the distance target, press the START button and then press the FAST
button, the running belt starts moving with the speed at 0.8km/h. You may press the FAST or SLOW button to increase or
decrease the running speed. Distance starts counting down from pre set distance to 0 per 0.1km backward. When the
preset target distance counts down to 0.0, the computer will begin beeping to remind you and the running belt will stop
automatically.