background image

 

3

IMPORTANT SAFETY INSTRUCTIONS 

 

Basic precautions should always be followed, including the following important 
safety instructions when using this equipment.    Read all instructions before using 
this equipment. 

 
1.  Read all instructions and follow it carefully before using this equipment.    Make sure the 

equipment is properly assembled and tightened before use. 

2.  Before exercise, in order to avoid injuring the muscle, warm-up exercises are 

recommended. 

3.  Please make sure all parts are not damaged and fixed well before use.    This 

equipment should be placed on a flat surface when using.    Using a mat or other 
covering material on the ground is recommended. 

4.  Please wear proper clothes and shoes when using this equipment; do not wear clothes 

that may catch any part of the equipment; remember to tighten the pedaling straps. 

5.  Do not attempt any maintenance or adjustments other than those described in this 

manual.    Should any problems arise, discontinue use and consult your local dealer. 

6.  Do not use the equipment outdoors. 
7.  This equipment is for household use only.    It is not a commercial model. 
8.  Only one person at a time should use this equipment. 
9.  If you feel any chest pains, nausea, dizziness, or short of breath, you should stop 

exercising immediately and consult your physician before continuing. 

10.  Care should be taken in mounting or dismounting the equipment. 
11.  Do not allow children to use or play on the equipment.    Keep children and pets away 

from the equipment while in use.    This machine is designed for adults use only.    The 
minimum free space required for safe operation is not less than two meters. 

12.  The maximum weight capacity for this product is 110 kg. 
 

WARNING: 

Before beginning any exercise program consult your 

physician.    This is especially important for people who are over 35 years old or who 
have pre-existing health problems. Read all instructions before using any fitness 
equipment.    Do not operate this exercise equipment without properly fitted guards, 
as the moving parts can present a risk of serious injury if exposed. 

 

CAUTION:

 Read all instructions carefully before operating this product. 

Retain this Owner’s Manual for future reference. 

 
 
 
 

Summary of Contents for HERACLES























Reviews: