10
STEP 3
The Foot Pedals, Pedal Shafts and Pedal Straps are marked with the letter R for the
Right and L for the Left.
Select the Right Foot Pedal Strap (21) which has R marked on the side of the strap. Snap
the three hole end of the strap onto the inside edge of the Right Foot Pedal (21). Snap the
other end of the strap onto the outside edge of the Right Foot Pedal (21). Select
adjustment holes which allow your foot to be easily removed from the foot pedal.
Use the same procedure to snap the Left Foot Pedal Strap (20) onto the Left Foot Pedal
(20).
STEP 3-1
The Cranks and Foot Pedals are marked with the letter R (Right) and L (Left) to denote
the side of the upright bike they are on.
Insert the pedal shaft of Left Foot Pedal (20) into threaded hole in the left Crank (19). Turn
the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the
threads.
Tighten the pedal shaft of Left Foot Pedal (20) with the Multi Hex Tool with Phillips
Screwdriver provided.
Insert pedal shaft of Right Foot Pedal (21) into threaded hole in right Crank (19). Turn the
pedal shaft by hand in the clockwise direction until snug. Tighten pedal shaft of Right Foot
Pedal (21) with the Multi Hex Tool with Phillips Screwdriver provided.
21
20
21
20
19
