15
STEP 12
Put the cable end of resistance cable of Tension Control Knob (31) into the cable lock of
Tension Cable (32), see Figure A.
Pull the resistance cable of Tension Control Knob (31) up and force it into the slot of metal
bracket of Tension Cable (32), see Figure B.
Insert the metal fitting on the resistance cable of Tension Control Knob (31) into the hole at
the end of the slot in the metal bracket of Tension Cable (32), see Figure C.
Connect the resistance cable of Tension Control Knob (31) to Tension Cable (32) complete,
see Figure D.
Attach the Tension Control Knob (31) onto the Front Post (30) with one Big Washer (34) and
one Cross Recessed Pan Head Bolt (35) that were removed. Tighten bolt with the Multi
Hex Tool with Phillips Screwdriver provided.
STEP 13
Remove four Cross Recessed Pan Head Bolts (33) from the Computer (27). Remove bolts
with the Multi Hex Tool with Phillips Screwdriver provided.
27
33
34 35
31
30
32
A
B
C
D
31
32
32
32
31
31
31
32
34 35
31
