11
5. Install the Lower Handrails and Left/Right Foot Bars.
Install two Safety Covers (85) onto the Lower Handrails (5).
Attach Left and Right Foot Bars (6, 7) to the Cranks (9) with
two M8x28x1.5 Washers (45), M8 Spring Washers (100),
and M8x20 Bolts (26).
Attach two Lower Handrails (5) to the Left and Right Upper
Handrails (3, 4) with four M8 Curve Washers (40), M8(UCP)
Spring Washers (57), and M8x15 Bolts (25).
6. Install the Left and Right Foot Pedals.
Attach Left and Right Foot Pedals (86) onto Left and Right
Foot Bars (6, 7) with four Washers for Foot Pedal (50),
M6x55 Carriage Bolts (24), M6x16x1.2 Washers (44), M6
Spring Washers (58), and M6 Foot Pedal Knobs (74).
Attach both Rear Foot Bar Covers (84) onto the rear end of
the Left and Right Foot Bars (6, 7) with two M5x12 Bolts
(36).
Attach Front Left and Right Foot Bar Covers (81, 82) onto
the front end of the Left and Right Foot Bars (6, 7) with two
M4x16 Screws (38) and four M5x12 Bolts (36).
7. Install the Computer.
Remove four M5x15 Bolts (35) from the back of the
Computer (94). Connect the Sensor Wire I (98) to the wire
that comes from the Computer (94) and then attach the
Computer (94) onto the top end of the Front Post (2) with
four M5x15 Bolts (35) that were removed.
8. Install the Handlebar.
Insert the Hand Pulse Wire (101) into the left hole on the
Front Post (2).
Attach the Handlebar (12) into the holes on the Front Post
(2) with four M10x28 Bolts (34). Insert the Hand
Pulse Wire (101) through into the hole on the Ø34×Ø22.2
Round Plug (70) and pull then it out. Finally, cover the
holes on the Front Post (2) with two Ø34×Ø22.2 Round
Plugs (70).
25
40
57
4
3
5
85
85
5
7
6
26
100
45
26
100
45
9
9
2
1
94
98
35
2
2
12
94
101
70
34
34
36
36
84
84
36 38
82
81
3681
82
36
38
36
5
85
7
8
6
6&7
86
44
58
74
24
50
