16
OPERATING THE COMPUTER
COMPUTER FUNTIONS:
AUTO ON /OFF:
When you start to exercise or press MODE button
on the computer, the computer will turn on. If you leave the
equipment for 4 minutes, the power will turn off automatically.
SCAN:
Press the MODE button until the arrow points to SCAN, the
computer will automatically scans each function in sequence with
change every 5 seconds.
TIME:
Press the MODE button until the arrow points to TIME, the computer will display your
elapsed workout time in minutes and seconds.
SPEED:
Press the MODE button until the arrow points to SPEED, the computer will display
the current training speed.
CAL (CALORIES):
Press the MODE button until the arrow points to CAL, the computer will
display the total accumulated calories burned during workout.
(PULSE):
Press the MODE button until the arrow points to PULSE and then hold both
two hands on handlebar grip sensors, the screen will display your current heart rate figures
and a heart symbol. To ensure the pulse readout is more precise, please always hold on to
the handlebar grip sensors with two hands instead of just with one hand only when you try to
test your heart rate figures.
DIST (DISTANCE):
Press the MODE button until the arrow points to DIST, the computer will
display the accumulative distance traveled during workout.
ODO (ODOMETER):
Press the MODE button until the arrow points to ODO, the computer
will display the total accumulative distance.
RESET:
Press the MODE button for
over 4 seconds, all function values will reset to zero
except the ODO function.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover at the rear of computer.
2. Place two "SIZE-AA" batteries into the battery housing.
3. Insure batteries are correctly positioned and battery springs are proper contact with
batteries.
4. Re-install the battery cover.
5. If the display is illegible or only partial segment appear, remove batteries and wait 15
seconds before reinstalling.
