9
Step 4
Attach the Leg Developer (10) onto the Seat Support Tube (8) with one M10x75 Bolt (35),
one M10 Nylon Lock Nut (38), and two Ø10 Washers (41). Tighten bolt and nut with two
Wrenches provided. Then cover the M10x75 Bolt (35) and M10 Nylon Lock Nut (38) with
two M10 Nut Caps (45).
Install one Spring Clip (18) onto the weight sliding tube of the Leg Developer (10).
Insert the
Foam Roller Tube
(11) through the hole in the
Leg Developer (10)
, leaving room
on each side for the
Ø17xØ70x140 Foam Rollers
(16). Slide both
Ø17xØ70x140 Foam
Rollers
(16) onto the
Foam Roller Tube
(11).
Use the same procedure to install the other
Foam Roller Tube
(11) and
Ø17xØ70x140 Foam
Rollers
(16).
Hardware:
11
10
16
18
11
16
16
35
45
8
38
45
41
41
2 Wrenches (14-17)
Tool:
1 Bolt (M10x75)
1 Nylon Lock Nut (M10)
2 Washers (Ø10)
