LifeGear 75118 Inversion table Page 17 Owner'S Manual Download | Manualshive

Page: 17 / 25

background image

OPERATION AND ADJUSTMENTS

16

ADJUSTING THE STRAP

For added safety, a nylon strap has been included to restrict the degree of inversion. This strap
can be adjusted to different lengths to allow for a greater or lesser degree of inversion. To
lengthen the Nylon Strap (32) feed the top end of Nylon Strap (32) into the strap lock, and pull on
the lower end of the strap. To shorten the length feed the bottom end of Nylon Strap (32) into the
strap lock, and pull on the top end.

ADJUSTING THE BOOM

The Adjustable Boom (3) can be moved to a variety of different positions, in order to
accommodate the height of the person on the inversion table. To adjust the boom loosen the
Knob (30), pull out the Large Spring Knob (18), and slide the boom up or down until the desired
height on the Height Scale (44) is positioned just below the Square Bushing (26). When the boom
is in the desired position, simply release the Large Spring Knob (18), slide the boom slightly up or
down until the Large Spring Knob (18) locks into place, and tighten the Knob (30).

4

18

30

3

44

32

32

SHORTEN

THE STRAP

LENGTHEN

«
...
15
16
17
18
19
...
»

Summary of Contents for 75118 Inversion table


























Reviews:

No comments

Related manuals for 75118 Inversion table

Brand: BANLAW Pages: 32

Brand: Baker Instrument Company Pages: 24

Brand: Camozzi Pages: 2

Brand: Oktober Pages: 22

Giraffe OmniBed

Brand: Ohmeda Pages: 54

Brand: Raytheon Pages: 69

Brand: Galaxy Audio Pages: 24

Brand: Gardner Bender Pages: 8

Brand: NARIKA Pages: 2

Brand: TATU Pages: 30

Brand: Rane Pages: 4

Brand: Sabio Pages: 182

Brand: Samson Pages: 2

Smart Plus PHT-35LHS

Brand: Vatech Pages: 190

Brand: ZOLL Pages: 37

Brand: Wacker Neuson Pages: 34

Brand: Wagan Pages: 4

Brand: Wachs Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands