45
Step 2
Pull the Cable 3 (52) forwards through the Main Upright Tube (1).
Slot the Pulley (29) into bottom of the Main Upright Tube (1) and pull the Cable 3 (52)
through underneath the Pulley (29). Then secure the Pulley (29) into bottom of the Main
Upright Tube (1) with one M10x70 Hex Bolt (44), one M10 Nylon Lock Nut (49), two
Ø10xδ12.5 Pulley Spacers (34), and two Ø10 Washers (48). Tighten bolt and nylon lock
nut with two Multi Hex Tools with Phillips Screwdriver provided.
PLEASE REFER TO THE “CABLE LOOP DIAGRAM” SECTION ON PAGE
28.
Hardware:
(34) Pulley Spacer
Ø10xδ12.5
2 PCS
(44) Hex Bolt
M10x70
1 PC
(48) Washer
Ø10
2 PCS
(49) Nylon Lock
Nut M10
1 PC
(29) Pulley Ø90
1 PC
Summary of Contents for 63150
Page 5: ...4 PARTS NUMBERS AND ILLUSTRATIONS ...
Page 13: ...12 EXPLODED VIEW ...
