LifeGear 63144 Owner'S Manual Download Page 32 | Manualshive

Page: 32 / 45

background image

31

STEP 10-1

A. Fix one end of the Arm Cable (33) to the Left Arm (20).
B. Pull the Arm Cable (33) forwards to the U-shaped Pulley Bracket (28). Slot the

Pulley (46) in the U-shaped Pulley Bracket (28) and pull the Arm Cable (33) through
over the Pulley (46). Then secure the Pulley (46) in the U-shaped Pulley Bracket (28)
with one Hexagon Head Bolt (76), one Nylon Nut (85), and two Flat Washers (87).
Tighten bolt and nylon nut with one 14 mm-17 mm Double Open End Wrench and one
17 mm-19 mm Double Open End Wrench provided.

C. Pull the Arm Cable (33) downwards to the Crossed Double Floating Pulley Bracket (23).

Slot the Pulley (46) in the Crossed Double Floating Pulley Bracket (23) and pull the Arm
Cable (33) through underneath the Pulley (46).    Then secure the Pulley (46) in the
Crossed Double Floating Pulley Bracket (23) with one Hexagon Head Bolt (76), one
Nylon Nut (85), and two Flat Washers (87).    Tighten bolt and nylon nut with one
14 mm-17 mm Double Open End Wrench and one 17 mm-19 mm Double Open End
Wrench provided.

D. Pull the Arm Cable (33) upwards to the U-shaped Pulley Bracket (28). Slot the

Pulley (46) in the U-shaped Pulley Bracket (28) and pull the Arm Cable (33) through
over the Pulley (46). Then secure the Pulley (46) in the U-shaped Pulley Bracket (28)
with one Hexagon Head Bolt (76), one Nylon Nut (85), and two Flat Washers (87).
Tighten bolt and nylon nut with one 14 mm-17 mm Double Open End Wrench and one
17 mm-19 mm Double Open End Wrench provided.

14 mm-17 mm

17 mm-19 mm

«
...
30
31
32
33
34
...
»

Summary of Contents for 63144














































Reviews:

No comments

Related manuals for 63144

Brand: Kettler Pages: 48

Es Ski 3100 Skier

Brand: NordicTrack Pages: 30

Brand: Lacertosus Pages: 18

Brand: DOLLAMUR Pages: 8

MARCY DIAMOND ELITE MD-857

Brand: Impex Pages: 14

Brand: ParaBody Pages: 15

Brand: ParaBody Pages: 5

Brand: ZAAZ Pages: 11

Brand: ParaBody Pages: 3

Brand: Ironman Fitness Pages: 15

Brand: XMark Fitness Pages: 11

Brand: Ultimate Plate Pages: 7

Power System KPS-2250

Brand: Keys Fitness Pages: 1

MINI-XPress 7351

Brand: BodyCraft Pages: 11

G7-S57 CALF EXTENSION

Brand: Matrix Pages: 2

Brand: TuffStuff Pages: 20

B341for Hermans Bench

Brand: Weider Pages: 4

Brand: Weider Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands