15
OPERATING THE COMPUTER
USING YOUR COMPUTER
The computer can be activated by pressing the MODE button or by
running. If you leave the equipment idle for 4-5 minutes, the power
will turn off automatically.
BUTTON FUNCTIONS:
Press the MODE button to select each function of the computer.
Press and hold the MODE button for 4 seconds to reset all data values to zero except the
ODO (ODOMETER) data values.
COMPUTER FUNTIONS:
SCAN:
Automatically scans each function in sequence with change every 5 seconds.
TIME:
Displays your elapsed workout time in minutes and seconds.
SPEED:
Displays the current training speed.
DIST (DISTANCE):
Displays the cumulative distance travelled during workout.
CAL (CALORIES):
Displays approximate amount of calories burned during workout.
(This data is a rough guide for comparison of different exercise sessions and should not be
used in medical treatment).
ODO (ODOMETER):
Displays the total accumulative distance travelled.
P (PULSE):
Displays your current heart rate figures after you grip the handlebar pulse
sensors with both your hands during exercise. To ensure the pulse readout is more precise,
please always hold on to the handlebar pulse sensors with two hands instead of just with
one hand only when you try to test your heart rate figures.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover on the back of the computer.
2. Place two size AAA batteries into the battery housing.
3. Insure batteries are correctly positioned and battery springs are in proper contact with
batteries.
4. Re-install the battery cover.
5. If the display is illegible or only partial segment appears, remove batteries and wait 15
seconds before reinstalling.
