6
6. Assembly Instructions
Attention:
Please follow these assembly instructions step by step to
assemble this upright bike.
1. Install the Front Stabilizer
Attach the Front stabilizer (11) to the Arc plate of Main
frame (1) with two Bolts (41), Arc washers (54), and Cap
nuts (48). (See figure 1)
2. Install the Rear Stabilizer
Attach the Rear stabilizer (17) to the Main frame (1) with
two Bolts (41), Arc washers (54), and Cap nuts (48).
(See figure 2)
3. Install the Handlebar Support
Put the cable end of resistance cable of Tension control (24) into the spring hook of Tension
control wire (15) as shown on drawing
A
of figure 3. Pull the resistance cable of Tension
control (24) up and force it into the gap of metal bracket of Tension control wire (15) as shown
on drawing
B
of figure 3. Connect the resistance cable of Tension control (24) with the
Tension control wire (15) completed as shown on drawing
C
of figure 3. Insert the Computer
wire (14) through into the bottom of Handlebar support (2) and pull it out from the top hole of
Handlebar support (2). Insert the Handlebar support (2) to the Main frame (1) and secure it with
four Bolts (42) and Arc washers (54). (See figure 3)
