7
S
TEP
2:
Note:
Follow Step 2 to assemble the Leg Press for the G3 systems. To assemble the Leg Press
for the G2 or G4 system, go to Step 3.
Note:
Flange bearings should be pre-installed.
A. Securely assemble the Second Arm (5) to the Frame (1) using one 1/2 x 4-3/4" Bolt (12), one
3/4 x 4" Shaft (15) and one 1/2" Lock Nut (13). See Figure 2.
B. Securely assemble the Main Arm (4) to the Frame (1) using one 1/2 x 4-3/4" Bolt (12), two 3/4"
Flange Bearings (14), one 3/4 x 4" Shaft (15) and one 1/2" Lock Nut (13).
Note:
Make sure Main Arm (4) is oriented correctly. The top hole should be 11-1/4" from the top
of the arm as shown in Figure 2.
C. Securely assemble two 1-1/2" Bumpers (16) to each side of the Main Arm (4) where the Main
Arm (4) contacts the Frame (1). See Figure 2.
D. Proceed to Step 3.
6
11-1/2”
12 1/2 X 4-3/4”
1
13
15
4
5
16
F
IGURE
2
A
SSEMBLY FOR THE
G3
SYSTEMS
.
Make sure the Main Arm
is correctly oriented.
