LifeFitness GLP Assembly Instructions Manual Download Page 4

Page: 4 / 16

MPORTANT

OTES

Thank you for purchasing the Life Fitness GLP Leg Press. Please read these instructions thoroughly

and keep them for future reference.
This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

OOLS

EQUIRED FOR

SSEMBLY

3/4" wrench.
9/16" wrench.
Ratchet with 3/4" and 9/16" sockets.
Adjustable wrench.
Tape measure.

OLT

ENGTH

ULER

Note:

Bolt length is measured from the underside of the head of the bolt.

1/2

OLT

ENGTH

MPORTANT

OTES

Thank you for purchasing the Life Fitness GLP Leg Press. Please read these instructions thoroughly

and keep them for future reference.
This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

OOLS

EQUIRED FOR

SSEMBLY

3/4" wrench.
9/16" wrench.
Ratchet with 3/4" and 9/16" sockets.
Adjustable wrench.
Tape measure.

OLT

ENGTH

ULER

Note:

Bolt length is measured from the underside of the head of the bolt.

1/2

OLT

ENGTH

Summary of Contents for GLP

















Search results

Summary of Contents for GLP

Reviews:

Related manuals for GLP

Brands by name

Popular brands

LifeFitness GLP, Assembly Instructions Manual

Search results

Summary of Contents for GLP

Reviews:

Related manuals for GLP

Brands by name

Popular brands