9
STEP 8:
FIGURE 8
STEP 9:
FIGURE 9
• Assemble the HANDLE (3) to the PIVOT ARM (4) using one 1/2 X 3-1/4” SHOULDER BOLT (24), one 3/8” LOCK WASHER
(22), and one 3/8” ACORN NUT (20) as shown in FIGURE 9.
(NOTE: Tighten enough to allow HANDLE to rotate freely.)
• Insert two 1/2” FLANGE BEARINGS (25) into the HANDLE (3) as shown in FIGURE 8.
25
3
24 1/2 X 3-1/4”
22
20
4
3
31
• Attach one 1-1/4” RUBBER BUMPER (31) to the HANDLE (3) as shown in FIGURE 8
3B
3A
