M8*28
M8*42
4.
Installation and parts list
Carefully take out the treadmill from the
shipping carton. Ensure that none of the parts
is not missing (picture no. 1).
Take 4 pcs of screw M8*2
8
and 4
pcs of screw
M8*4
2
and
washers and attach the
left and right
vertical beams to the
part of treadmill.
Do not tight the
screws
fully
before complete
the installation.
Take 2 pcs of screw M8*25
and attach
them to vertical beams.
When
mounting, make sure that the cables are
located in the frame to prevent them
from pinching.
Remove screw M5*20 on the
console, keep them aside to use in
later steps, as shown bellow:
M5*20
