Page | 7
Step 2:
Tools Needed:
5mm Allen wrench: 0J3Q
4mm Allen wrench: 0J3P
Note:
It is recommended that two adults help
during this step.
1) Locate bag labeled
Figure 2
.
2) Locate right and left side rails.
3)
(See Figure 2)Note: Apply a small
amount of assembly grease to the
inner top rails to help slide rails easily
into place.
Locate left side rail. Insert
lower left side rail down into the lower
portion first. This will allow the top portion
to slide into position easier. Slide the rail
into the upper support tube. Attach upper
support tube with Qty two M6x1-16 short
bolts and Qty two 6x13 washers to secure
rail.
4) Next, attach the lower portion with Qty two
M6x1-50 long half threaded bolts and Qty
two 6x13 washers. Additional help may be
needed to push down on rail to help align
holes. Using a 5mm Allen wrench, tighten
the top bolts and use a 4mm Allen wrench
to secure to bottom bolts.
5) Repeat same steps for right side.
